When you purchase gear through links on our site, we may earn a small commission. Here’s why you can trust our tests and our affiliate partner.
It would be an understatement to say the Foil Drive Gen2 MAX system has been a runaway success for the brand and a testament to strategic, future-proof design, particularly in the context of consumer electronics. Almost three years after its initial release, the Foil Drive system has sculpted a new discipline within the foiling ecosystem, with assist now universally accepted by brands and consumers alike. It’s also helped the wider industry fiscally with the inevitable side sells and upgrades required for the average user in boards and foils, let alone enabling accessibility to people that would have never set foot on a foil, where eFoils were perhaps prohibitively expensive or bulky. We’ve got a lot to thank them for. Another testament to good design is that my elderly pre-production unit is still alive and well after countless hours of use and foil testing.
The Fusion slotted into the range earlier this year as a bridge between eFoil and assist and shifted onto a more polished and powerful 43v battery architecture with increased thrust on tap as well as an extended runtime, tipping it well into eFoil territory. It was well received, with the inevitable compromise on weight meaning some more performance-focused users stuck to the old system for its nimbleness. We’re now presented with the best of both worlds with the Foil Drive Assist MAX+ system, which brings a form factor very close to the previous Gen2 up to 43v. There’s far more detail in there than a simple voltage and capacity change; there’s a generous swathe of subtle upgrades which lifts the overall professional feel of the package and increases usability.
Statistically we’re talking 35.5kg of maximum thrust or 2.88HP, edging very close to the Fusion. Boost mode releases 2150W to get on foil with 1750W sustained power. This is a 29% increase over the Gen2 MAX system. Install weight sits at 6.71kg with the FM 650+ battery, a negligible ~900g over the legacy system with the HP MAX battery. Back-to-back on the same rig, the weight difference for me was undetectable. Runtime increase compared to a HP MAX battery is up around 20-25%. As you’d expect, everything is significantly improved.
The FM+ 650 (648Wh) battery does an excellent job of balancing weight runtime and now that extra zippy 43v performance. The battery pack has had a Fusion style makeover with the nosecone now integrated and the cells fully encased and resin-potted for extra waterproofing and safety. It also has a smarter, more communicative BMS in there, so you can check battery health with the app, and this also allows accurate charge state readings on the V3 controller regardless of whether you have the throttle pressed or not, a vast improvement over the Gen2 from a readability perspective. Cell technology has been improved, which means far less voltage sag, and a more consistent amount of power as the battery goes into the lower charge levels. Foil Drive describes this as battery depth, and it means no significant voltage sag occurs until the last 5% of usage. In practice, having the full zing is great toward the end of the session when you’re a bit tired, and you don’t want to have to flap your arms about too much to water start. Another key feature is that the FM+ 650 battery can be made compatible with the Fusion system with the addition of the FM+ Battery adapter which is essentially a bridge to allow the shorter FM+ 650 battery to connect to the longer Fusion unit.
One of our favorite new features hidden in the software is the ability to turn the battery on and off with the phone app. If you’ve finished the session and thrown the rig in the back of the van, and it’s doing the “I’m still live” tweeting noise while you drive home, instead of having to stop, fumble about and disconnect the battery like the bad old days, you can hop on the app and simply turn it off. If you prefer to prebuild your rig for rapid response sessions before you go to the beach like I do, this means it can all sit together in the car without being live, which is intrinsically more safe. Arrive at the beach, turn it on in the app, and off you go. For those who don’t require the runtime or want a lighter rig, the smaller FM+ 430 version is in the pipes for release early next year which is essentially a sport-sized 43v battery weighing in at 2.6kg vs. 3.95kg for the FM+ 650.
The toolset has also seen a big upgrade with the updated stainless Torx drivers faring well in a marine environment and the highly important 2.5mm hex driver now upgraded to titanium, so will have far more longevity in a marine environment than the previous blue one. The wireless controller charger now has a USB-C port, meaning you can plug it into nearly anything and you’re not trying to hunt down that legacy USB mini cable; it also has slightly raised feet, meaning the V3 controller sits on it more comfortably. The 43v charger is a far more serious affair, with a heat sink Darth Vader would be proud of and the ability to charge to storage state if required at the touch of a button. You no longer require a battery checker as this can all be done live on the phone app.
The new unit itself is extremely close in dimensions to the old Gen2; if you squint you’d miss it. Comparing them side by side with no battery, it’s around 10mm longer and exactly the same width. Similarly to the Fusion, there’s now a sacrificial anode to help with corrosion and at the rear there’s some channeling on the underside to help keep electrical components cool. Importantly, the almost identical form factor allows full backwards compatibility with legacy motors, trench boards and integrated masts so you don’t need to worry about your existing Foil Drive investment portfolio.
M7 titanium split bolts (just like the Fusion) are included, as the apertures through the unit have been minimized to cram more electronic and battery space into the unit – they’ve got a shallow thread pitch to allow great compression of the unit into the foil tracks. They sit in a neat tool caddy which slots into the unit in the battery port keeping sand out while you’re not using it and doubling as a carry handle. The unit ships with the V3 controller as standard, which has far more tech baked in than the V2, dual springs, and a GPS chip for app upgrades going forward. Last but not least, the packaging has been vastly improved with zippable shadow foam casing for both the battery and the unit and components itself. As some users will be upgrading the unit and battery alone rather than the full system, every combination you could require is there at point of purchase if you plan to carry forward a HP motor or integrated mast or mini pod.
Riding the new system is extremely familiar in terms of weight and balance but it’s had six months daily at the gym with a PT and perhaps dabbled with anabolic steroids, and this goes for both thrust and endurance. For flat-water starts you can easily drop a foil size, or if you stick to your existing setup expect a generous increase in runtime. For our mid-sized swell conditions in cold water, we were getting well over an hour with a 90kg rider on an 850cm² foil as an example, with an easy flat-water start. As a lighter rider, my wife at 60kg for instance, I’d recommend using the app to lower the power output, as the thrust really isn’t necessary, which of course extends the runtime even further. Performance surf applications aside, the extra grunt and runtime in the system means that using the system as a learner you can power your way through bad technique more quickly.
The Foil Drive Assist MAX+ polishes the versatile all-round foil assist package further, retaining its previous form factor and stepping up performance in every context. As the foil assist market expands and (in some cases) becomes board specific, it’s also worth considering the continued universal nature of the system which will bolt on to any board with track boxes. With high levels of backwards compatibility with existing motors, integrated masts and boards, they’ve elegantly achieved a significant upgrade without ostracizing their large and loyal user base. The devil is in the detail – the whole package is far more polished, hard wearing, more reliable and user friendly, and I fully expect it to last another three years of happy motoring with ease.